22 Exterior Prefab House Gable Roofline Design Photos And Ideas

The entrance to the Orchid Tiny House.
They tiny house connects to the outdoors with clerestory windows, floor-to-ceiling windows, skylights, and a garage door that opens up an entire wall.
To protect against water penetration, the walls and roof are assembled with three-quarter inch pressure-treated OSB sheathing, Typar housewrap, an ice and water shield, asphalt paper, furring strips, and stained penofin cedar.
According to Remijnse, since the only direction they could build on the small site was up, they decided to add height with a gabled roof.
A bright-yellow “R” sign, from a truck that used to deliver furniture from Jens Risom Design, sets off the southern facade. When Jens designed the house, he stipulated that he wanted cedar shingles, not the asphalt ones that came with the original design from the catalog.
On the north-facing facade, it’s easy to discern where the original glass doors used to open directly to the deck. In spring of 2012, Block Island contractor John Spier replaced the entire wall of glass panels.
Originally, glass doors opened to the deck, but after years of gusty winds, it was decided that a side entrance, protected by a sliding steel door, would be the preferred entrance.
Mid-century designer Jens Risom's A-framed prefab family retreat, located on the northern portion of Block island, is bordered by a low stone wall, an aesthetic element that appears throughout the land.
Designed by architect Tanja Rytkönen, Vista is a compact log home with a high pitched roof, and fully glazed façade.
Designed by architects and experienced sailor Kari Leppänen, Honka’s Saari villa was built with 134-milimeter thick square logs treated with a dark finish, and has three-meter wide eaves that provide shade, and wind protection for the outdoor patio.
This house has a sauna and four bedrooms, including a master bedroom on the second level that looks down onto the lake.
A Honka model called Kommodori was used for this seaside home,
This dwelling joins a number of structures—such as a boathouse and guesthouse—owned by one family and used for vacations. They needed a new house to accommodate new generations at the reatreat.
Project Name: ModHaus

Website: http://eastcoastmodern.ca/
Each prefabricated unit is covered in aluminum but built from SIPS (Structurally Insulated Panels) that consist of thick insulation sandwiched between plywood panels. These high-performance panels keep the interior protected from the desert's ambient heat.
Renowned designer and architect Jens Risom sourced parts from a catalog for his customized A-frame and had them delivered in pieces to his remote island site off Rhode Island, helped to raise the aesthetic profile of modular construction.
Inspired by the traditional shingle-clad homes in the neighborhood, this prefab home in Seattle was based off a base design by Method Homes and then customized by Grouparchitect to accommodate the client’s needs and a unique site. Doors were widened, a rear porch was enclosed for an additional bedroom, and specialized storage including an enlarged laundry room, a generous pantry, and built-in cubbies for each member of the family were added.
A study room that opens to the green backyard.
An updated modular prefab in Norway's in the Snarøya peninsula.
The Sanders family has been serving up modular homes on the Gulf Coast since 1985.
Clad in a mix of stained cedar, Metal Sales corrugated siding, and James Hardie cement board, houses in The Village are arranged along winding paths intended to provide opportunities for neighbors to interact.
Girodo describes LEAPfactory’s architecture as being “molded according to the needs and stresses imposed by context.” In this setting, strong winds and snow loads are serious concerns. The shell’s composite sandwich panels and aluminum shingles ensure that the school can withstand the elements.

Zoom out for a look at the modern exterior. From your dream house, to cozy cabins, to loft-like apartments, to repurposed shipping containers, these stellar projects promise something for everyone. Explore a variety of building types with metal roofs, wood siding, gables, and everything in between.