Exterior Metal Roof Material Wood Siding Material House Metal Siding Material Glass Siding Material Concrete Siding Material Design Photos and Ideas

The tower features a ladder for access to the utilities, and the roof is planted with native shrubs to soften the concrete construction and reflect the approach taken with the landscaping.
The ground floor projects out from the slope and sits over the top of the concrete foundations, in which a wine cellar—accessed through a hatch in the hallway floor—is located.
The home is made of 42 unique cross-laminated timber panels. The smallest panel is 450 millimeters x 1500 millimeters, and the largest panel is the entire southern wall—14.4 meters x 2.3 meters. The cantilevered ground floor at the rear of the home was made possible by the strength of these panels.
There is a play between really earthy, natural materials—which are seen in some of the cladding, tiles, and concrete work—and a very sleek, black metal aesthetic. “I have a lot of experience in commercial architecture, so I’m not scared of using more commercial, industrial materials on a residential building,” says Craig.
Walls of glass, horizontal roof planes, and a natural material palette enable this expansive home to feel like an extension of a dramatic boulder-strewn landscape in Idaho.
007 House by Dick Clark + Associates
Pinon Ranch appears to emerge from the dense oak grove.
The “knuckle” connects the public and private spaces with the meadow on one side and the oak grove on the other. The space between the volumes is as carefully considered as the architecture itself.
Cantilevered out over the hillside the residence, which also serves as the couple's primary residence, is threaded between the trees, anchored by its concrete foundation which stops just short of the tree’s roots.
The gabled structure peers out from the dense oak grove to the meadow below.
Exterior
Exterior at Dusk
A view of the three-story DFAB House perched atop the NEST Building.
Consisting of three prefabricated units in West Seattle on a 5,000 square-foot lot, the Genesee Townhomes—by Method Homes and Chris Pardo Design—from 1,250-1,400 square feet, each with three bedrooms and two and a half bathrooms.
Surrounded by rugged beauty, the home was designed with a faceted exterior optimized for wraparound views unique in each room.
The C6 is one of LivingHomes' most popular models. Coming in at 1,232 square feet, this LivingHome offers a comfortable living space for a relatively low cost.
The house is positioned on top of a hill on a 150-acre site where a ridge connects the Illawarra escarpment to the sea. From its elevated position, it looks down towards Werri Beach and Geering Bay.