Sleeping nooks that look like the grooves in a block of cheese.

A passage between the walls for hide and seek.

A look at the small reading nook located on the level between the bedroom and ground floor.

ICON developed its Vulcan I 3D printer over a period of about two years. The gantry-style printer on rails is mobile and weighs about 2,000 pounds.

The original home’s second floor had three bedrooms with flat ceilings. Arch11 quickly realized there was a great volume in the upper floors at the gable ends of the home and chose to integrate the attic space into the second floor. This design move allowed the interior to be informed in part by the exterior while creating a bright, serene living space among the treetops.

Thanks to the extension’s vaulted ceiling, the master bedroom and minimalist staircase have views of the sky. Polly admits to having sacrificed floor area so that the full-height stairwell could achieve a stronger connection with the outdoors. Toyo Ito Mayhuma pendants hang from the ceiling, accentuating the space’s dramatic height.

In one of the three bedrooms, Wright designed a built-in desk and graphic chair. The angular windows and skylights are continued into the bedrooms.

Coffee and Tea Set, 1995-1996. Zaha Hadid (Iraqi, b. 1950). Sterling silver. Overall: 18 1/2 x 22 1/16 x 14 3/16 in, Tea Pot: 3 1/8 x 5 7/8 x 11 in, Coffee Pot: 3 15/16 x 3 9/16 x 11 in, Milk Jug: 2 3/4 x 7 7/8 x 3 9/16 in, Sugar Bowl: 2 3/4 x 3 9/16 x 3 15/16 in. Silver. Made by Sawaya & Moroni, Milan, Italy. Don't miss a word of Dwell! Download our FREE app from iTunes, friend us on Facebook, or follow us on Twitter!

An archival photo shows the interior of the detached studio with drafting tables awash in light through the enormous skylight above.

Built in the early 60s, the separate concrete-and-glass studio echoes the original home.

The finished print measures approximately 5 x 5 feet.

The second-floor plan: 1. Rooftop garden, 2. Media room, 3. Guest bedroom, 4. Bathroom, 5. Deck.

The exterior of Connect 4L 1,600 sf 3 bed 3 bath 2 story modern prefab.

The unit is 3.5 meters long and 2.4 meters tall, and is a chic focal point in the room.

The extensive use of natural wood on nearly every surface makes the inside of The Barn feel like an extension of the landscape outside.

“The Low Poly Pokémon project started as a challenge,” says their designer Flowalistik. “I wanted to try to transform the low-quality graphics the first Pokémon video games had into a 3D model." The resulting forms can be printed in a wide range of materials—it depends on your local 3D printer—though the plastic seen here is most common.

Assembly Rack by M-S-D-S Studio for EQ3, $300 Made of oak, this minimal, ladder-like rack can squeeze into the tightest of spaces. No mounting or installation is needed—just lean it against a wall.