It was almost two decades ago when photo agent Michele Karpé and her husband, John Andrews, purchased a property in the rolling hills of Santa Ynez, California. While living in Los Angeles, they spent years visiting the remote land on weekends, taking in breathtaking views and dreaming of the day they’d be able to build a little getaway. Unfortunately, it wasn’t as easy as they’d hoped.
When the couple finally felt ready to build, they prepped the site, investing in a driveway to make it easier to traverse the quarter mile uphill from the nearest access road. They then drafted plans for a home and had them engineered, permitted, and even approved—processes that took a significant amount of time and financial investment—before learning that the costs to build would be more than double the estimate. Creating a home, they felt, was once again out of reach.
Stay up to Date on the Latest in Prefab Homes
From cozy cottages to large family houses, see how prefab continues to redefine the future of construction, building, and design.
Instead of giving up, however, the couple began exploring other options; while at a Dwell on Design show at the Los Angeles Convention Center, they discovered prefab homebuilders Connect Homes. Going prefab made total sense for Michele and John: They knew exactly how much the home would cost from their very first meeting.
For their Santa Ynez property, the couple chose the Connect 4, a 1280-square-foot, two-bed, two-bath model they customized with the addition of two covered decks. They also made the home wheelchair accessible to accommodate Michele’s sister, who has multiple sclerosis. "She can walk with a walker, but given the uneven ground in the country, I was projecting that wheelchair access would be better," says Michele. "It only takes two steps to get down to the house after grading and landscaping."
Floor-to-ceiling glass sliders open the home onto the wide, covered decks, providing panoramic views of the stunning property. "The client made so many good design choices—from the black finishes to just the right amount of glass, and the daring placement of the stove," says architect Gordon Stott, who cofounded Connect with fellow architect Jared Levy in 2013. (Both came from Marmol Radziner, and Levy was in charge of prefab there.)
In the living area is a Morsø wood-burning stove positioned up against the glass sliders. When the sliders are open to the deck, the stove anchors one huge indoor/outdoor lounge space. "I was worried that it would be weird, but it’s absolutely perfect," Michele says. "That stove kept us warm all through the cold winter. It heats up the whole house."
The home regulates temperature with a white roof, and is well insulated thanks to triple-glazed sliding doors. "We have arrived in the middle of 100-degree weather when the house has been closed up for days, and inside it would be 20 to 25 degrees cooler," says Michele.
Along with energy-efficient designs and up-front pricing, Connect prides itself on an assembly-line process that enables the company to build quickly, and more sustainably. Stott estimates that by building in a factory, they’re able to cut down on construction waste by 60 percent when compared with more traditional building methods.
After the off-site construction of Michele and John’s home was complete, Connect installed the design on the Santa Ynez property in just three hours. In a stroke of perfect timing, the home was finished just before the pandemic, making it the perfect refuge for the now-retired couple.
"Living with a view from almost every room in the house is my favorite," says Michele. "Connect Homes did a great job of positioning the house and the windows. We have a lot of wildlife in the area and there is always something to see."
Architect of Record: Connect Homes, Gordon Stott
Builder/General Contractor: Connect Homes, Gordon Stott
Structural Engineer: 8th St. Construction & Consulting, Reza Shabani
Landscape Design Company: BCLA / Bethany Clough Landscape Architect
and Edgar Zepeda Landscaping
Cabinetry Design/ Installation: Connect Homes
SJB Architects collaborated with members of the Nyul Nyul Community to create an on-site harvesting facility that works…
The compact, modular design was originally showcased at an exhibition before finding a permanent location in the…
The prefab design by Wiercinski Studio looks right at home tucked into its lush surrounds, but it was born to roam.
Latvia’s My Cabin has created three prefab structures—a sauna, an office space, and a home—that can be purchased à la…
Designed by Trias, the 215-square-foot Minima prefab packs the versatility of a Swiss army knife.