A Seattle Musician Improvises During the Pandemic by Building Out His Own Backyard Cottage
Starting with a design from prefab builder NODE, musician Michael Lerner relies on YouTube tutorials and perseverance to complete a DADU.
About eight years ago, Michael Lerner of the band Telekinesis and his wife, Amiee, bought a 1954 home on a sizable Seattle lot. Over time, they accrued enough equity in the property to finance the construction of a detached accessory dwelling unit for their backyard. "We’d been thinking about doing a DADU for some time, but it all really happened to coincide with this pandemic, and me not being able to travel or work," says Michael. Even though he didn’t have any training in construction, formal or otherwise, Michael had always been interested in learning how to build a house. So when the pandemic struck, he was suddenly presented with the opportunity.
Michael Benjamin Lerner of the band Telekinesis collaborated with local prefab builder NODE to build a 392-square-foot DADU in Lerner’s Seattle backyard. The builder took care of design, permitting, site prep, and the foundation and framing. Michael tackled the finish work.
Photo: Ellie Arciaga Lillstrom
He and Amiee flirted with the idea of turning a shipping container into a small residence, but it ultimately would have been too expensive. Instead, they chose to collaborate with local prefab builder NODE, who was experimenting with a one-off pilot program to test new prefab technologies.
For the program, NODE essentially provided a completed shell: They designed and engineered the DADU, prepped the site, installed the foundation, and finished the framework. They then roughed-in plumbing and electrical before completing the building envelope. They handled all of the permitting, too, which made for a streamlined process. "In reality, it’s incredibly difficult to permit something like this," says Michael.
"It became really apparent that the only way we were going to be able to achieve something like this was if we built it, or if we built a large part of it, ourselves," says Michael. "We didn't have the funds to do a project like this if we were going to pay someone to do the entire thing."
Photo: Ellie Arciaga Lillstrom
Stay up to Date on the Latest in Prefab Homes
From cozy cottages to large family houses, see how prefab continues to redefine the future of construction, building, and design.
Michael had just returned home from a tour when NODE started the build in late fall of 2019. The timing allowed him to work alongside the crew to get the hands-on education in construction that he’d long desired. "I really wanted to learn about how every process happened," he says, describing eight-hour days. "So yeah, I was there right from the beginning."
After two months of work, NODE was finished with their part, leaving the couple to complete the DADU as they saw fit. The moment was a memorable one: "It was like, ‘What on earth do we do now? And how on earth do we do it?’ It was terrifying," says Michael.
Michael and Amiee finished the walls in plywood, while the floors are covered in large-format tile with a radiant heating system underneath.
Photo: Ellie Arciaga Lillstrom
To find answers—and a way forward—Michael turned to YouTube, estimating that he watched some 1000 hours of tutorial videos to learn everything from laying tile and trimming out the plumbing and electrical, to installing an IKEA kitchen and building a deck. "There were so many times in the project where I felt like it was an insurmountable task, and I would really feel I wouldn't be able to do it," he reflects. "And then every time I started to do it, I realized that it was totally doable."
When it wasn’t possible to install a freestanding wood-burning fireplace, Michael opted for a bio ethanol model. "I was able to get the ambient, cozy aspect of a fireplace without the bummer of having to direct any noxious fumes out of the house," says Michael.
Photo: Ellie Arciaga Lillstrom
An IKEA kitchen looks sleek and saves space.
Photo: Ellie Arciaga Lillstrom
The only trades the couple hired out were the installation of the quartz countertop, backsplash, and drywall in the bathroom. Michael says the quartz "takes an IKEA product that’s relatively inexpensive and makes it look a lot more high-end."
Photo: Ellie Arciaga Lillstrom
Michael also built the floating media console and desk/eating area, which are both walnut plywood. "For a beginner, it’s terrifying because they’re like $200 for a sheet of plywood," says Michael.
Photo: Ellie Arciaga Lillstrom
Shop the Look
Herman Miller Eames Molded Plywood Lounge Chair Wood Base (LCW)
Hailed by Time as the Best Design of the 20th Century, the LCW — or Lounge Chair with wood legs (1946) — began as an experiment in Charles and Ray Eameses’ apartment, where they were molding plywood in what they called the “Kazam! Machine.” The machine pressed thin sheets of wood veneer against a heated membrane that was inflated by a bicycle pump. From these humble beginnings came what would become one of the world’s most widely recognized and highly coveted chairs.
ShopEastvold Classic Credenza
This is NOT your grandma's credenza. It's better. Much better. Our Classic Credenza may look like an iconic mid-century piece, but this one is equipped with the modern conveniences you expect from media storage. The Classic Credenza is built with reinforced mitered joints, which allow the wood grain to wrap around the piece in one fluid sweep, showcasing the beauty of the locally-harvested, solid wood. The solid wood doors are grain matched and roll open with smooth sliding hardware. The interior has adjustable shelves and wire management portals that allow for unlimited media configurations. The Classic Credenza is finished with a durable, clear lacquer that will hold up to your sweatiest cocktails. Because let's face it, no one has the time to mess with polishing furniture anymore, not even grandma. Eastvold Furniture is a small company based in Minnesota that uses ethically harvested lumber in the construction of their furniture. Photo Courtesy of HORNE
ShopHerman Miller Nelson Cigar Lotus Floor Lamp
While outfitting his office, architect and Herman Miller design director George Nelson discovered a silk-covered Swedish hanging lamp that he coveted but found too expensive. He then recalled seeing a photo in the paper of Liberty ships being mothballed “by having the decks covered with netting and then being sprayed with a self-webbing plastic,” which got him thinking. “And then, Whammo!” Inspiration struck, and by the next night, Nelson had designed his first Bubble Lamp (1952) by spinning a skeleton of steel wires on a turntable and shooting it with translucent plastic until it was covered in a smooth, washable film. “When you put a light in it, it glowed,” he said. This is the authentic Bubble Lamp, produced in partnership with the George Nelson Foundation. Bulb (not included): LED, CFL or incandescent; E26 base; 60W max for small, 150W max for others. UL Listed. Made in U.S.A.
ShopThe couple wrapped the project in August of 2020, and have since been renting it out on Airbnb for extra income. Michael reflects on his work with immense pride, and has a newfound respect for the building industry. "I really appreciate people that do this for a living," he says. "And I have so much more respect for the entire process and the reason why a house is an expensive thing to buy." He adds: "It was a really eye-opening experience and it was super fun. Also, an incredible way to spend a bummer year, really."
A bedroom nook sits off the main living spaces.
Photo: Ellie Arciaga Lillstrom
Michael built a platform for the bed and lined the walls in wool felt. "It feels like you’re sleeping in a quiet little cocoon," he says.
Photo: Ellie Arciaga Lillstrom
"It was very, very fun for me to be involved in everything from the moment we broke ground, until we were able to pop some champagne when it was done," says Michael, sitting with wife Amiee and their dog, Gerry.
Photo: Ellie Arciaga Lillstrom
A built-in planter adds a pop of green in the bathroom.
Photo: Ellie Arciaga Lillstrom
Michael wrapped the exterior in 2x2 cedar boards with a half-inch gap between each one, which took about four weeks and 2,000 screws to complete.
Photo: Ellie Arciaga Lillstrom
Michael and Amiee enjoy the DADU's deck. "We were just super careful and I researched the heck out of everything," says Michael of their DIY approach to all of the finish work.
Photo: Ellie Arciaga Lillstrom
Related Reading:
Budget Breakdown: A Seattle Couple Expand Into a Backyard Addition for $413K
Project Credits:
Design: NODE + Michael Lerner / node.eco + @telekinesis
Structural Engineer: Lund Opsahl
Interior Design: Michael Lerner
Cabinetry Design and Installation: IKEA and Michael and Amiee Lerner
Published
Last Updated