A Corrugated Steel Prefab in Australia Throws a Curve
Transported in a single shipping container and raised in two weeks, this clam-shaped cabin nestles against a rocky outcrop outside Sydney.
The idea of a prefabricated cabin, with components light enough to carry and assemble without heavy machinery, had long had a siren call for owner and architect Mark Fullagar. After many nights sketching and dreaming of the perfect solution, Fullagar came up with the Fabshack—a 540-square-foot cabin with 90 percent of its structure built off-site.
Architect Mark Fullgar chose corrugated steel, aluminum window frames, and strengthened glass—cost-effective, non-combustible materials, given the cabin’s location in a rural fire zone.
Tom Ferguson
Fabshack is designed to be adaptive to many different site configurations. In this instance, it nestles into a rock outcropping on the architect’s property northwest of Sydney.
Tom Ferguson
Stay up to Date on the Latest in Prefab Homes
From cozy cottages to large family houses, see how prefab continues to redefine the future of construction, building, and design.
Designed and built by Fullagar, the compact, comfortable cabin has a queen-size Murphy bed, seating area, storage, open kitchen and dining room, bathroom, laundry room, and deck from which to enjoy mountain views on his 26-acre property in Cattai, a suburb of Sydney, Australia.
A north-facing veranda includes an outdoor seating area adjacent to a stone fire pit.
Tom Ferguson
The cabin is constructed of cost-effective, non-combustible materials in 8-foot-wide bays. Each bay consists of hollow-insulated plywood panels nestled within a steel frame, elevated on piers that lift the structure above the ground. Insulated plywood forms the continuous ceiling and curved wall of the cabin, creating a soft interior while facilitating necessary rainwater drainage on the outside.
The kitchen is fully equipped with appliances and storage, and accommodates a small table.
Tom Ferguson
A green linoleum countertop and black cabinets add a pop of color to the wood interiors. Open shelving provides additional storage.
Tom Ferguson
A recessed light extends along the length of the cabin, from the kitchen through to the living room.
Tom Ferguson
Corrugated steel, aluminum window frames, and strengthened glass create an industrial exterior. By contrast, the plywood-wrapped interior adds warmth and texture to complement the natural setting. Green linoleum countertops and black millwork enliven the muted palette. Large windows face west to take in the mountain views, with sliding shutters that protect against the afternoon sun.
Large windows face west, providing uninterrupted views of the valley below and mountains beyond. Sliding exterior shutters and low-E glazing protect the interior from afternoon sun.
Tom Ferguson
A queen-size Murphy bed folds down from this interior wall, transforming open living space into a bedroom.
Tom Ferguson
Wardrobe storage flanks either side of the built-in bed.
Tom Ferguson
Shop the Look
Studio Snng Wedge Shelf
The Wedge Shelf is a knock-down shelf system that requires no hardware and locks with provided wedges. The modular design is configurable to multiple lengths and heights. The shelves are produced in solid wood.
ShopParachute Percale Sheet Set
The start to making your perfect bed. Crafted in Portugal from 100% premium, certified long-staple Egyptian cotton – our percale is lightweight and durable with a crisp finish that only gets better with time. Photo Courtesy of Parachute
ShopHerman Miller Eames Molded Plywood Dining Chair Metal Base (DCM)
The Eames Molded Plywood Dining Chair (DCM stands for “Dining Chair Metal“) (1946) began as an experiment in the Eameses’ apartment and became one of the world’s most widely recognized and highly coveted chairs. Low-slung with an expertly crafted molded seat and back, this chair supports you in a comfortable ergonomic position. Rubber shock mounts buffer against jarring movement. Its seat and back were so thin the design was nicknamed the “potato chip chair” soon after it was launched. Decades later, it earned a different title, when Time magazine named it the Best Design of the 20th century. An authentic product of Herman Miller, Inc. Eames is a licensed trademark of Herman Miller. Made in U.S.A.
ShopNinety percent of the work was completed in a workshop, meaning minimal labor time was spent on site. All components were packed in one shipping container, and each component was carried by one or two people to the site.
The shower is built into the curve of the structure, maximizing the unique space.
Tom Ferguson
Green linoleum countertops and black cabinets reappear in the bathroom. A south-facing window draws in plenty of natural light. Even the cabinetry and plumbing fixtures were built in the workshop.
Tom Ferguson
Clerestory windows draw in additional daylight while still providing privacy.
Tom Ferguson
The Fabshack demonstrates the flexibility and adaptability of prefab construction. Since the cabin is comprised of modular bays, it can be modified for different purposes or sites, its components easily dismantled and recycled, and its materials upgraded depending on preferences and budget.
Related Reading:
A Brazilian Couple’s Prefab Cabin Is the Perfect Outpost For Forest Bathing
This Solar-Powered Prefab in Seattle Was Raised in One Day
Project Credits:
Architect of Record: Mark Fullagar
Builder / General Contractor: Mark Fullagar
Structural Engineer: Taylor Thomson Whitting
Published
Last Updated
Topics
Prefab Homes