Stacked Boxes Form an Experimental Hillside House
Built into a steep slope, this contemporary spec house hopes to raise the bar for hillside development in Los Angeles.
When David Freeland and Brennan Buck of architectural design practice FreelandBuck purchased a roughly 6,000-square-foot hillside property in the Mount Washington neighborhood of Los Angeles, they saw potential where many others would have only seen challenge.
Working together with Marieke Ochtman of real estate development firm Urbanite Homes, the architects turned the steep terrain into the site for their first spec house—dubbed the Stack House—that’s designed to push the envelope in hillside residential design.
The four-story Stack House is nestled into a hillside in the city's Mount Washington neighborhood.
Eric Staudenmaier
Named after its stacked box appearance, the 2,207-square-foot vertical home navigated the difficult site constraints—including tricky zoning codes and steep terrain—while prioritizing indoor-outdoor living on all four floors.
"With each offset, the adjacent roof becomes a balcony, expanding interior spaces to the exterior at every floor," explain the architects. "These indoor-outdoor spaces have varied orientations with unique and unobstructed views to the San Gabriel mountains."
Eric Staudenmaier
Get the Pro Newsletter
What’s new in the design world? Stay up to date with our essential dispatches for design professionals.
"Unlike conventional hillside homes that appear to have been placed atop the slope, this house is embedded into it, creating a much closer relationship to the landscape," the architects explain.
"The exterior cladding of the house is custom-made, a play on board-and-batten siding organized into patterns that suggest varied depth and texture," notes the firm. "Painted in subtle gradations from white to gray, the striped shadows of the board-and-battens shift throughout the day. "
Eric Staudenmaier
Smart home features were integrated throughout and include a sprinkler system, Nest control, and tankless water heaters.
Eric Staudenmaier
The four-bedroom, three-bath home is divided into a series of boxes, each slightly rotated and shifted to create outdoor spaces and optimize unobstructed views of the San Gabriel Mountains.
Folding aluminum-framed glass doors facilitate a seamless transition between indoors and out.
Eric Staudenmaier
The architects also integrated an accessory dwelling unit (ADU) into the massing and sandwiched the a bedroom suite between the two-car garage on the ground floor and the primary living spaces on the third level.
Accessed via a separate entry, the second-level ADU can be used as an office, fourth bedroom, or a suite for a possible tenant.
Eric Staudenmaier
Organized into a simple grid of four rooms, the third floor houses a dining area, kitchen, living room, and den—all defined by curved interior walls.
The kitchen is fitted with marble counters and backsplashes, as well as Viking and Bosch appliances.
Eric Staudenmaier
"The central corner of each room is removed, as the rooms are knitted together by a series of tangent arcs," adds the firm. "The curves blend spaces while carefully opening views through the house."
A powder room is sandwiched between the dining room and den.
Eric Staudenmaier
Shop the Look
Herman Miller Eames Molded Plastic Armchair
Charles and Ray Eames realized their dream to create a single-shell form over 80 years ago by making their molded chairs of fiberglass. When the environmental risks of that material became known, the Eames Molded Shell Chair (1950) was changed to polypropylene, which is 100% recyclable and has a pleasant matte texture. In 2013, Herman Miller safely brought back the fiberglass shell thanks to a new proprietary production process. Today’s fiberglass chair is made of 99% recyclable materials and covered by Herman Miller’s take-back program for environmentally sound recycling. Plus, it’s true to the original with its beloved variegated surface. Also making its debut in 2013 was the stunning Eames Molded Wood Chair, a longtime dream of the Eameses finally made possible by today’s revolutionary 3-D molding technology. The result is an elegant yet strong and durable beautiful wood shell. The collection was expanded again in 2015 to include a counter stool and barstool. Each provides just the right amount of give, with a deep seat pocket and waterfall seat edge to reduce pressure on the backs of thighs. The Molded Shell Chair is a celebration of the Eameses’ fascination with emerging materials. “The chair that Charles and Ray were designing,” says grandson Eames Demetrios, “is the chair that’s made tomorrow.” This is an authentic Eames Chair by Herman Miller. Made in U.S.A.
ShopConnubia Seven Dining Table
The Seven Dining Table is a classic rectangular glass top table with a modern appeal. It's highly reflective tempered glass top exposes Seven's strong welded steel base. The unique base is formed by 4 slanting welded steel legs that come together to form two opposing x's, drawn together by a short central rail. Enjoy the art of design while you dine with Seven. Photo Courtesy of YLiving
ShopFrench oak flooring in a natural finish has been used throughout.
Eric Staudenmaier
The fourth level comprises a master suite along with two secondary bedrooms, all of which are organized on the same four-square grid as the level below.
The master suite is located in the front of the home and opens up to a balcony through folding glass doors.
Eric Staudenmaier
Completed in 2018, the bespoke Stack House had been listed for an asking price of $1,399,000 and is currently pending a sale.
The fourth floor connects to an outdoor dining area and garden space.
Eric Staudenmaier
The Stack House level-one floor plan
The Stack House level-two floor plan
The Stack House level-three floor plan
The Stack House level-four floor plan
The Stack House axonometric diagram
Project Credits:
Architect of Record: FreelandBuck / @freelandbuck
Builder/ General Contractor: Urbanite Homes
Structural Engineer: Marco Ibarra
Civil Engineer: Joe Podegracz
Stay Here in Los Angeles
Published