An Architect’s Gable-Roofed House Near Munich Fits Five Levels Inside
In his own family residence, architect Kai Binnewies carves out a multilevel interior to put a modern twist on tradition.
In the small village of Havixbeck, Germany, just a short drive from Munich, sits a striking contemporary comprising brick, glass, and concrete. Dubbed the House in Havixbeck, the structure was designed by local architect Kai Binnewies for his young growing family.
Photo courtesy of Kai Binnewies
"Because of the slopping terrain and difficult building regulations, the site was long for sale," says Binnewies. While the development plan limited the building to a rectangular form, the architect viewed the constraint as an opportunity to stretch the limits of the classic gable-roofed houses dotting the area.
Photo courtesy of Kai Binnewies
Get the Pro Newsletter
What’s new in the design world? Stay up to date with our essential dispatches for design professionals.
Photo courtesy of Kai Binnewies
"The design fits all regulations but interprets the traditional gable-roofed house in a modern way as a sequence of abstract, interlocking shapes," says Binnewies. According to the architect, these types of homes are traditionally placed upon a concrete base and capped with a pitched roof featuring glazing on both sides. For his rendition, Binnewies designed the structure with a similar exterior form, but created an interior that features five levels.
"The design is based upon two-by-three-meter squares with a side length of 350 centimeters," says Binnewies. "All major rooms have the proportion of one-to-one or one-to-two."
Photo courtesy of Kai Binnewies
Photo courtesy of Kai Binnewies
Photo courtesy of Kai Binnewies
The private quarters—including two kids’ rooms, the primary suite, and a guest bathroom—are housed on the lower two floors, while the public living areas are designed as open spaces.
"Entering the building, one will instantly experience its spatial concept," states Binnewies. "Despite the clear organization in the plan, the home develops many surprising spaces; it is equally simple and complex, as well as playful and strict."
Shop the Look
Herman Miller Eames Hang-It-All
In the mid-1940s, Charles and Ray Eames began designing toys and furniture for children, including molded plywood animals, colorful building blocks and whimsical masks. “We have to take pleasure seriously,” said Charles Eames, and the Hang-It-All (1953) is an example of this mantra. Made with a sturdy steel frame and solid wood balls, this design was created using the same technique for simultaneously welding wires that the Eameses developed for their low tables and wire chairs. They originally made the Hang-It-All for Tigrett Enterprises’ Playhouse Division, and Herman Miller reissued it in 1994. This is the authentic Hang-It-All by Herman Miller. Eames is a licensed trademark of Herman Miller.
ShopMoooi NR2 Pendant
Hugely dramatic, light as a feather and distinctly Dutch, NR2 (2015) is made by coiling a strand of epoxy-dipped fiberglass around a large balloon, then popping it once dried, leaving behind a very delicate globe-shaped diffuser. This pendant is suitable for entryways, lounge areas and dining rooms, with a light bulb that’s visible at its center when lit, emitting an all-over glow with minimal glare. Bulb (included): 12W LED array, 450 lumens, 2700K. UL Listed. Made in the Netherlands. Photo Courtesy of Design Within Reach
ShopHerman Miller Eames Lounge Chair and Ottoman
Charles and Ray Eames had ideas about making a better world, one in which things were designed to bring greater pleasure to our lives. Their iconic Eames Lounge Chair and Ottoman (1956) began with a desire to create a chair with “the warm, receptive look of a well-used first baseman’s mitt.” The result embodies what it really means to lounge. In continuous production since its introduction, this set is widely considered one of the most significant designs of the 20th century. Combining soft, inviting leather or mohair with the sleek form of molded wood, the Eames Lounge Chair and Ottoman is the culmination of the Eameses’ efforts to create a club chair using the molded plywood technology they pioneered in the ’40s. Even today, each piece is assembled by hand to ensure the highest level of quality and craftsmanship, and you’ll be pleased to discover the set gets even better with use and age. Cushions snap in and can be removed and changed. This is the authentic Eames Lounge Chair and Ottoman by Herman Miller. Made in U.S.A.
ShopPhoto courtesy of Kai Binnewies
Photo courtesy of Kai Binnewies
Binnewies’s favorite features are the large glazing above the books in the living room, which frame a view of the oak tree, and the fireplace, which stretches to two levels.
Noting the sudden increase of building costs during the project, the architect adds: "We didn't have much money left to spend on the kitchen, furniture, or landscaping. Although, we were able to stretch our budget further by doing a lot of work ourselves."
Photo courtesy of Kai Binnewies
Photo courtesy of Kai Binnewies
Courtesy of Kai Binneweis
Related Reading:
A Series of Interlocking Gables Create a Light-Filled Family Home in Denmark
A Black Gable Villa in Copenhagen Stands Out From Its Stately Neighbors
Project Credits:
Architecture: Kai Binnewies (design) & Jorgen Dreher (execution)
Construction: M. Laurenz
Structural Engineering: Beatrix Zeisberg
Photography: Roman Mensing & Kai Binnewies
Published
Last Updated