692 Exterior Metal Roof Material Wood Siding Material Design Photos And Ideas - Page 4

Scott and Lauren’s compact backyard home is located in the back half of their 5,000-square-foot lot in the Richmond neighborhood of Southeast Portland.
Materials used for the exterior include stucco, wood, metal, and concrete.
The exterior door adds a pop of color to the white and gray facade.
Steel columns echo the Norwegian folk form.
The house features a simple gable roof.
Western Red Cedar with a clear vertical grain was paired with vertical and horizontal shiplap for the exterior siding.
The back of the home opens up to an outdoor patio, hot tub, and fire pit.
Originally built in 1974 as a kit home, the A-Frame was constructed with cedar siding and metal roofing. The house faces east toward the water.
A 669-square-foot, one bedroom, one bedroom guest unit, the Trillium is a zero-net energy house with a large outdoor storage closet.
In contrast to its heavily glazed north facade, the home's other three sides are closed off from view for privacy.
A splash band of black Richlite wraps the base of the building to protect the timber siding from the snow and rain.
A separate two-car garage is located near the entrance of the house, which has a bike rack and planters out front.
Reinforced concrete was used for the retaining walls and slabs along all grades, while wood framing with steel framing beams were used at cantilevered areas.
"Both the deep-set windows and the brise soleil, in addition to the back canted wall, help to control solar gain."
A glimpse of the entrance at dusk from the south elevation. To the right is a swimming pool shielded behind wooden fencing.
A view of a gravel walkway and the entrance that leads to a covered pathway. "The entry side is hyper minimal and mysterious with slight glimpses out from within, providing only a tease on approach from the road," says the firm.
The deck projects out toward the beach.
"The dark silhouette of the fortress-like structure [is] one of few things seen through the thick fog," add the architects.
Extra-dark bronze standing-seam metal partly clads the home and creates an armored appearance.
Located on the southern shore of Nova Scotia in Kingsburg, Treow Brycg is set in wild landscape of rocks, the sea, and tall grasses.
A view of the main home's sheltered entrance with the annex to the right. All buildings feature continuous exterior insulation.
This annex houses a large recreation room as well as a guest suite.
A dramatic cantilevered roof helps mitigate unwanted solar heat gain while inviting in warm winter light.
Completed for an approximate cost of $2,000,000, the modern, net-zero home features 3,835 square feet and is located in the heart of Suncadia’s master-planned community.
To recall the region's past as a historic mining town, a rustic palette of mostly natural materials were applied to the home, including stone, Cor-ten steel, and reclaimed barn wood with modern detailing.
The board-formed concrete, steel, and teak over a rainscreen system blend the building into the site.
Surrounded by rugged beauty, the home was designed with a faceted exterior optimized for wraparound views unique in each room.
Located in Western Idaho, the Cliff House faces views of Payette Lake toward the south and west, while vast granite and dense forest flank the property to the north and east.
"Exterior materials include black anodized-aluminum windows, stained western red cedar, and pre-painted metal siding," Parish says. "These materials complement the new modern volume of the house, while also nodding to the existing character of the neighborhood."
The exterior's many textures include stained western red cedar siding, a white oak veneer front door, and a concrete walkway.
This custom residence for actor Will Arnett was inspired by LivingHomes' RK2 model. About a third was built on-site, including a glass staircase tower and a guest wing (featuring a recording booth where Will can ply his trademark baritone).
To minimize water use, SCDA and Strata Landscape Architecture designed a native, drought-resistant planting plan with sensor-controlled drip irrigation. The lawn takes up less than 10% of the landscape.
Vertical planks of western red cedar provide a warm contrast against horizontal zinc siding panels.
main road
facade materials
Here, Plant Prefab partnered with LivingHomes, one of the top sustainable home design firms in the nation, on the LivingHome AD1, a versatile Accessory Dwelling Unit (ADU) designed to fit either in backyards, or as a main structure on an empty lot. The LivingHome AD1 was designed to be flexible and comes in various finish options.
A collage of brightly colored, geometric volumes comprise the Ettore Sottsass–designed residence of Lesley Bailey and Adrian Olabuenaga, proprietors of jewelry and accessories company ACME Studio. Completed in 1997, this home is one of few private commissions designed by the Italian architect, who passed away in 2007.
Dawnsknoll’s exterior sidings are cement panels and Resysta wood. The house’s front gate and garage are made from recycled wood.
Manufactured in a factory offsite, the 370-square-foot house can comfortably fit two people.
The home's modular design is composed of an outer shell and an interior core unit that contains essential living functions, such as a bed, bathroom, and a small kitchenette.
The front gate opens to the inner courtyard.
The front of the home features a privacy wall and a peek at the pleated roofline.
LivingHomes at Atwater Village is a part of a collection of six single-family homes located in the heart of L.A.'s Atwater Village.
The C6 is one of LivingHomes' most popular models. Coming in at 1,232 square feet, this LivingHome offers a comfortable living space for a relatively low cost.
This boxy contemporary prefab in Hollywood was a custom-built for a client.
In contrast to their former house that had been set on a flat, densely wooded lot, the clients picked a steeply sloped West Vancouver property with sweeping panoramic views.
The attention to detail extends to the design of the home's streamlined contemporary gutters.
A look at the dramatic slice in the roof, which provides an exciting intersection between modernism and the vernacular design.
The gable-ended structures reference the agrarian history of the site. Each roof is supported by dark timber and steel trusses, inspired by the property’s existing hay barn.
Nestled between sprawling trees, the property sits on the valley floor, leaving a courtyard space with a pool in the center.
A timber-land bridge connects the cabin to a decked terrace.
Set at an elevation of nearly 4,000 feet, La Dacha is lifted into an evergreen canopy.

Zoom out for a look at the modern exterior. From your dream house, to cozy cabins, to loft-like apartments, to repurposed shipping containers, these stellar projects promise something for everyone. Explore a variety of building types with metal roofs, wood siding, gables, and everything in between.