165 Exterior Prefab Flat Roofline Design Photos And Ideas - Page 2

Some pavilions overlook the water, while others are nestled further into the coastal bushland.
The exterior Red Ironbark cladding was charred—using the Shou Sugi Ban technique—to increase the longevity of the timber and as a nod to the significance of fire.
All three flat-roofed buildings are clad in weathering steel expanded metal rainscreens, while floor-to-ceiling operable glass walls bring the outdoors in.
The property offers 64 acres of varied terrain, including an open meadow, manzanita thickets, and forests full of oak, madrone, Douglas fir, and ponderosa pine.
"In contrast to their introverted loft, High Horse Ranch was designed to be outwardly focused and defined by the site, its views, and the natural landscape," says KieranTimberlake.
Exterior shot of Haase home.
A corrugated metal roofing, pine walls stained a warm blonde hue, and an abundance of glass make this modern prefab feel much roomier than its 1,600-square-feet size.
On the shores of Moose Lake, Wisconsin, the inspiration for Roger Scommegna’s Aperture House came from the $9.99 bottles of wine produced at his Signal Ridge Vineyard.
When Abbie and Bill Burton hired Marmol Radziner to design their prefab weekend home, their two requests were “simple-simple, replaceable materials,” says Abbie—such as concrete floors (poured offsite in Marmol Radziner's factory) and metal panel siding—and “the ability to be indoors or outdoors with ease.” Deep overhangs provide shade and protection from rain, so the Burtons can leave their doors open year-round and hang out on their 70-foot-long deck even in inclement weather. They visit the house once a month, usually for a week at a time, with Vinnie and Stella, their rescue Bernese Mountain dogs. Their two adult children occasionally join them. The couple hopes to one day retire here.
Based in Sacramento, CA, TAYNR specializes in prefab homes built from shipping containers.
Established in 1997, Artisans Group in Olympia designs modern homes throughout the greater Seattle and Portland areas. Their design-build models allow the company to provide full design services, and thanks to a partnership with Phoenix Haus—a Passive House panel fabricator—they are now able to develop Passive House prefab homes.
The main room opens to the quad through a large pivoting garage door.
Installation started at 11 a.m. and the second floor was stacked by 3 p.m. later that same day.
The modern ski chalet in its snowy alpine setting.
The geometric patterns on the backside of the hotel.
The metal façade of the foundation creates a patterned surface.
The individual modules are emphasized by metal siding; the rest of the building has been constructed from vertical slats of rough-cut, untreated larch.
The two angled elements of the building follow the shoreline of the Heidisee Lake.
The prefab cabin is an arresting sight at night.
On both floors, large windows bring the outdoor scenery in, blurring the boundaries between interior and exterior.
Entry court
Approach via long gravel driveway; Great Peconic Bay seen beyond
The three-bedroom, two-bathroom cabin has a communal space with a custom Baltic Birch bookshelf, and a bench by the window where the owners can look out to the surrounding wilderness, and fern meadow.
Architect Joseph Tanney says the house was designed as a safe haven for Wexler and Zimmerman’s children.
Local materials were used for onsite works such as cut timber trunks for the rear wall and locally sourced stone for the platforms.
The interior of the glass cube is a flat, flex space for an office, yoga, or creative interpretation.
The glass cube at the front of the home brings in natural daylight throughout the entire unit.
The Independent Kasita is a model designed for individual placement and can be considered as an accessory dwelling unit.
The Media Lab is located in the middle of Bard College campus.
The Media Lab has been painted black to recede into the woods.
The only site prep required was pouring the concrete foundation walls.
Consisting of three prefabricated units in West Seattle on a 5,000 square-foot lot, the units range from 1,250-1,400 square feet, each with three bedrooms and two and a half bathrooms. The generous glazing of the living rooms are set back from the exterior cedar rainscreen, and the rest of the facade is sheathed in metal panels. The ground floor was built onsite, but the upper two floors were prefabricated offsite in a factory.
Designed as a complex of eight housing units for a tight urban infill site, the MOD urban apartments were the first modular apartment building constructed in Seattle. When completed in 2013, the project achieved LEED Gold certification; its interior layouts eliminated the need for an elevator or internal hallways, and was outfitted with Energy Star appliances, low VOC paint and finishes, and radiant heating.
As Washington State’s first LEED Platinum Modular Home, Lane Street was completed by Greenfab with a focus on energy reduction through a combination of eco-friendly exterior materials and energy-conscious heating and cooling equipment, including a hybrid heat pump water heater and energy recovery ventilation. The home, at 1,870 square feet, consists of three bedrooms and was completed for an all-in cost of $405,000 in 2010.
Based in Wynwood, Florida, Wyn-Box constructed their model container home out of two used cargo containers. The 640-square-foot, one-bedroom showroom was designed by architects Ruslanas Byckovas and Ethan Royal with Ryan Anderson, a business developer, and boasts a stainless steel kitchen, porcelain gray tile, and a modern, clean gray exterior.
The starting price for a fully built 685-square-foot, two-bedroom Cubicco model in the Miami area is just over $115,000.
Functioning as a vacation rental for tourists, entrepreneur Rick Clegg combined old shipping containers to create a four-bedroom home with an eco twist near Palm Beach, Florida. Because of the container's inherent durability, they meet Florida's stringent construction standards, and the compactness of the home, the low carbon footprint because of the use of the recycled, prefabricated containers, and the home's proximity to the Loxahatchee River, make it ideal for ecotourists.
The steel-framed platforms are largely open to the elements.
The the warm wood siding is juxtaposed against the industrial grey steel frame of the structure.
All the modules were designed to be able to fit on the platform of a freight truck.
The terrace serves as the dining area for the home.
The terrace attaches to the main structure via a covered walkway.
Gorgeous exterior of the Connect 8 Prefab home.
The numerous sliding windows also provide the option of passive cooling and an open-air kitchen, living area, and dining area.
The floating suites are scattered throughout the site.
After sunset the effect is reversed, and a radiating internal glow emerges from between the wooden slats.
Night views.
An exterior view.
The wood screens translate the elegant vertical movement of the reeds into a repetitive geometric pattern.

Zoom out for a look at the modern exterior. From your dream house, to cozy cabins, to loft-like apartments, to repurposed shipping containers, these stellar projects promise something for everyone. Explore a variety of building types with metal roofs, wood siding, gables, and everything in between.