After deciding to transition into residential architecture from a large, international design firm where he’d focused on higher education buildings, architect Alex Wu made himself his first client. He opted to build a spec home on a so-called “unbuildable” lot in Atlanta, Georgia’s Old Fourth Ward neighborhood.

Wu recounts his line of thinking: “How could I compete for lots against developers with deeper pockets and much cheaper construction? My answer was to look for a project with so many constraints that a typical developer would avoid it because they would need the expertise of a good designer.” He sought out small, narrow lots as a result. “Fortune led me to a 20-foot by 75-foot lot that met my financial model requirements,” says Wu.

$5,308 Permits & Fees	$1,650 Design Fees	$13,845 Site Work & Utility Connections
$10,659 Footings & Excavations	$5,659 Steel	$27,146 Framing
$20,235 Plumbing	$11,792 Electrical	$9,584 HVAC
$13,776 Roofing & Gutters	$17,416 Masonry	$34,780 Windows & Doors
$6,654 Insulation	$17,994 Siding & Exterior Paint	$10,595 Drywall
$11,645 Hardwood Floor	$8,824 Interior Trim	$31,176 Stairs
$8,028 Ceramic Tile	$26,485 Cabinets & Wood Ceiling	$6,353 Appliances
$3,164 Plumbing Fixtures	$1,553 Electrical Fixtures	$9,447 Interior Paint
$11,055 Landscaping	$2,941 Driveway	$3,529 Masonry Fence
$918 Miscellaneous
Grand Total: $332,212

Note: Since Alex Wu designed A Mews House as a personal project, architectural fees are not included in the grand total.

Still, Wu’s 20-foot-wide lot presented numerous challenges. First, Wu had to get a variance to increase the house’s allowable size and decrease the setbacks, which ultimately expanded the house’s footprint from a six-foot-wide house to one that could be 14-foot-wide. “From a design perspective, a 14-foot-wide house, like any narrow house, is a challenge to make into functional space,” said Wu.

Rather than max out all of the available space with a rectangular box, Wu divided the house plan into three parts. Now, a white brick-clad box fronts the street, stepping down from a more traditional, gabled form at the back. These sandwich a glass “spacer” in between, which houses the entry and main stairs. Standing three stories high in the back, the home hosts two bedrooms, two-and-a-half baths, and a bonus office, and is a comfortable 1,650-square-feet despite the constraints at the start of the process. “Often when people visit, they don’t even notice that the house is so narrow,” says Wu.

The front of A Mews House is clad in Boral Brick’s Magnolia Bay brick, while the gabled form at the back is sheathed in vertical, board-and-batten siding.

“As its name implies, the project is inspired by thoughtful mews, or carriage, houses that have been converted to residences in London,” says Wu. “The project also plays off the clichéd farmhouse modern style prevalent today.” Wu also cites Mews House by Russell Jones and House Bäumle by Bernardo Bader Architekten as influences on the design.

Shop the Look

More Budget Breakdown:

A Toronto Home Makes the Most of an Infill Lot For $446K

A Trio of Friends Build a Backyard ADU in Los Angeles For $252K

This Hip Multifamily Pad in Austin Cost Under $515K

Project Credits:

Architect: Alex Wu Architect

Builder: F M Studio

Structural Engineer: Law Engineering Consultants, Inc

Other Company: Dekalb Surveys, Inc

Staging: Design2Sell, LLC

Also Appears In

Budget Breakdown: An Architect Builds a 14-Foot-Wide House in Atlanta For $332K