Dyson Airblade: Prototyping
Published by Dwell

With the technology to produce a 400-mph wind capable of drying a person’s hands in 12 seconds, the next step was to design a shell. Starting with cardboard and foam models, the team devised the shape as a waist-high, wall-mounted scoop into which users dip their hands to activate the sensor then slowly raise them while the air wicks away wetness.

Dyson’s aerodynamics specialists optimized the design for laminar flow—–the streamlined movement of air. Held inside the hand dryer’s outer gray casing, the laminar flow chamber carries the air from the motor up the nozzle and out the 0.3-mm slot, resulting in a shape that resembles a science-fiction robot’s underwear.

Engineers made more than 200 prototypes, refining the shape and functionality along the way with an unlimited budget. “The air nozzle parts for just one machine cost $13,050,” Churchill recalls. One contributing factor: “We made them out of bluestone, a material used by Formula One teams, because of the tolerance and heat-resistance requirements,” he says.

That wasn’t the only pricey part. Two selective laser sintering (SLS) machines were constantly humming, laser-bonding nylon powder, as fine as baby powder, into 0.15-mm layers, at a cost of $35 per pound of powder.

Everybody loves feedback. Be the first to add a comment.
The author will be notified whenever new comments are added.
Dwell Life © 2016Download our iOS App

We’re inviting you to join us to create a place where we can inspire and share with each other every day, collaborate on collections, projects and stories, ask questions, discuss and debate ideas.

Log in