lamesadevenn: Part 6
-
Excavating for most residential foundations takes a few days, maybe a couple of weeks. Due to the expansive soils and the lamesadevenn collaborative’s desire to mitigate erosion by impeding rain runoff, the bulldozers were chomping for nearly a month. In Santa Fe, earthwork averages around $800 a month, but through some dealing with two amenable local contractors, Su Hogar and Wingspan Construction, lamesadevenn managed to cut this price in half. -
Keeping with lamesadevenn’s commitment to working with the land as much as possible, the Rancho building was designed to do more than house people and programs: it would also keep the earth around it intact. This meant that a particularly robust (read: deep and expensive) foundation was required—and the amount of rebar laid in the footing trenches, shown here, would far exceed that used in an average house. -
Like the Greek economy and last season's Minnesota Twins, the concrete spit out of the agitator truck was, well, in a slump. In lay terms, the “slump” of freshly mixed concrete is simply a measure of how well it holds up when you try to build sandcastle with it. As the pumpers began to partially pour the spread footings, consulting E/CA architect Christopher Alba (who doubles as lamesadevenn founder Christian Alba’s concerned father) had the stuff tested using a funnel shaped “slump cone.” As he suspected, the pumpers had mixed the concrete with too much water, rendering it overly “slumpy,” which would have seriously reduced strength when the foundation fully cured. They stopped pouring and the adjusted the mix in the nick of time. -
Once the spread footings were poured and allowed to partially cure, “stem walls,” like those pictured here, are erected and then “grouted solid,” or filled with concrete. -
And at long last, the walls—real concrete block walls—began to rise. After such a drawn out design and building process, it felt like the walls sprang up overnight. And they almost did—it took only a few days for skilled masons, like the fellow pictured here, to build the first floor of a building that had at times seemed an unattainable dream. -
Less speedy was the complicated installation of radiant heat tubes, broken into different zones to heat the house with maximum efficiency. Pictured here are the ends of the tubes of several distinct heating zones, each of which had to be tied into a network of serpentine, liquid-filled tubes, which in turn would be embedded in the concrete floor demarcated by the wooden formwork. -
The radiant heat tubes are shown here in the final stage before pouring the concrete slab over them. Now an industry standard, radiant heat has proven cost efficient over forced air and baseboard systems in the long run though it's costly up front. It has also proven to be a headache for many home owners. Because the tubes are embedded into the cement floor, installation errors can incur astronomical remediation fees. lamesadevenn was fortunate to collaborate with one of Santa Fe’s best, Thom Elrite from Territorial Plumbing and Electric, to get their system right.
When the first chill comes in autumn, the boiler will send hot liquid through the embedded tubes in the floor. Because it has so much concrete—technically, “thermal mass”—the floor will hold on to the heat much longer than, say, the old metal radiator in your grandparents’ house, and so will demand less replenishment from the boiler, which means less use of natural gas. It’s good for your bare feet on a cold morning, great for your wallet when the energy costs start to rise, and a nice gesture towards the planet.
-
The foundation nears completion. The three major first level spaces of the building can be seen, the first in the foreground and two more in the back. Note the wide gap of earth between the first space and the second: a signature feature of lamesadevenn’s design.
Categories:
More
lamesadevenn: Part Three
A joyous moment: The site that Alba and Lopez discovered, on the developing southside of Santa Fe, offered the space, the views, and a promising pack of neighbors.
lamesadevenn: Part Four
Site in hand, lamesadevenn began developing a design and program that would be cutting-edge and strikingly original—and of questionable feasibility.
Steel and Magnolias
What sort of house might a man with the title “recycling coordinator” live in?
lamesadevenn: Part Two
In this series, trace the evolution of lamesadevenn, an international collaborative of architects, product designers and communication specialists who are redefining how and why we design.
Add comment