Advertising
Advertising

Explore

Filter by article type:

Explore - Furniture & Products

  1. Steelwood Chair: Perimeters
    How To

    Steelwood Chair: Perimeters

    The next tool makes a perpendicular fold around the sheet’s perimeter, which allows the hard edges to be folded away from the smooth backrest. Parts of this fold will become armrests. &ldquo...

    01.01.09

  2. Steelwood Chair: Cuts, Curves, Cuts
    How To

    Steelwood Chair: Cuts, Curves, Cuts

    The tool that folds the curve of the back of the chair is the most dramatic, but it is no more essential than the others, which trim the edges, cut the holes, and add a final soft angle to the...

    01.01.09

  3. How To

    Steelwood Chair: Fitting Wood

    Four straight legs and a round seat are CNC-milled out of solid beech, bolt holes and all, ready for fixing to the punched and painted steel. As the chair began production in early 2008, the...

    01.01.09

  4. Flos Glo-Ball
    How To

    Flos Glo-Ball

    Designers and manufacturers bemoan the profusion of cheaply made copycats, but it’s been proven time and again that truly great design can never be obscured by poor imitation. For evidence, look no...

    written by: Virginia Gardiner
    photos by: Alex Subrizi
    01.25.09

  5. Flos Glo-Ball: Blow Mold
    How To

    Flos Glo-Ball: Blow Mold

    When the blob has reached a diameter of about six inches, it has already been handled by two or three blowers, who multitask like chefs.

    01.01.09

  6. Little Field of Flowers
    How To

    Little Field of Flowers

    Nanimarquina—In 1987, Barcelona-based designer Nani Marquina established a textile and rug design studio. Since 1993, the company’s designs have been manufactured in northern India....

    written by: Virginia Gardiner
    01.25.09

  7. Little Field of Flowers: Weaving
    How To

    Little Field of Flowers: Weaving

    Depending on the size of the rug—they come in three sizes—one or two technicians at SPN operate the loom, which involves painstaking manual labor. “Every two or three lines,” Marquina explains, “we...

    01.01.09

  8. How To

    Prep

    Zippers, buttons, and other add-ons are rendered unnecessary by Looolo’s pillowcase closure system, which uses a tried-and-true technique: overlapping flaps on the back. “Zippers and...

    01.01.09

  9. How To

    Pattern

    Notkin, who started her career making costume jewelry, has a knack for romantically contrasting hues and textures. In fact, her favorite part of the creative process comes before anything is made...

    01.01.09

  10. How To

    Concept

    On every scale, from cottage industry to mass market, production starts with research. Johnstone begins by scouring the globe for team members who have the right skills and design sense to match a...

    01.01.09

  11. How To

    The Trabecula Bench: Drawing

    Kyttänen’s designs travel straight from his imagination to the computer. “Hardly anything happens on paper anymore,” he says, “because most of the files are so complex that it’s practically...

    01.01.09

  12. The Trabecula Bench: Sintering
    How To

    The Trabecula Bench: Sintering

    “Sintering” is not an everyday word for most people—it means using laser energy to melt and fuse particles. It’s traditionally applied to metal, but nowadays it works very well on certain varieties...

    01.01.09

  13. 02 Plywood
    How To

    02 Plywood

    Wrong based his designs on DIY plywood-furniture patterns from postwar Britain. “It’s a very simple message of construction using plywood and turned timber legs,” he explains.“ They’re like...

    01.01.09

  14. How To

    The 3107 Chair: Prep the Veneer

    In the idyllic Danish countryside, 15 miles northwest of Copenhagen, autonomous robots transport pallets of veneer down the aisles of Fritz Hansen’s 161,000-square-foot chair factory. Nearby,...

    01.02.09

  15. How To

    The 3107 Chair: Glue and Mold

    A worker then places single layers of inner veneer on a conveyor belt that sends them through what looks like a doughnut-glazing machine, coating both sides of the veneer with a white liquid...

    01.02.09

  16. How To

    The 3107 Chair: Cut and Sand

    Once the plywood has hardened, a worker wearing sound-suppressing earmuffs places the pieces, three at a time, into the factory’s computer numerically controlled (CNC) machine. The milling...

    01.02.09

  17. How To

    The 3107 Chair: Paint and Ship

    The discs also serve as hooks for hanging the chairs upside down on a conveyor belt that leads them to a glassed-in room. There, a robotic arm paints the curved surfaces with polyurethane paint....

    01.02.09

  18. Bolle
    How To

    Bolle

    On Murano, an island near Venice, Italy, glass artisans go to work before dawn. Inside one workshop, the kilns have been howling all night, preparing colored glass for the day’s work. In 1921...

    written by: Virginia Gardiner
    photos by: Alex Subrizi
    04.30.10

  19. How To

    Dyson Airblade: Concept

    In 2004, Dyson was exploring new ways to use its patented Dyson digital motor (DDM), which contains a virtually frictionless setup and was developed to make small vacuum cleaners for the Japanese...

    01.02.09

  20. How To

    Dyson Airblade: Research

    Research in air filtration and house-hold cleanliness had already led Dyson to build an in-house testing laboratory overseen by microbiologist Toby Saville. “There wasn’t an established...

    01.02.09

Pages

Advertising