Advertising
Advertising

Explore - Wood

  1. Marmol Radziner Prefab
    How To

    Marmol Radziner Prefab

    Amid the industrial expanse of Vernon, California, Marmol Radziner Prefab’s factory-built homes are pieced together in a process akin to the assembly lines made famous by Henry Ford.

    written by: Jessica Hundley
    03.16.09

  2. The 3107 Chair
    How To

    The 3107 Chair

    It takes nine sheets of veneer, two layers of cotton backing, up to five coats of paint, and 11 days to make a 3107 chair. We take you to the floor of Fritz Hansen's stackable-chair factory to show...

    written by: Miyoko Ohtake
    photos by: Alex Subrizi
    07.20.09

  3. Ruché Sofa
    How To

    Ruché Sofa

    On a walk through Ligne Roset’s factory near Lyon, France, we track the multitude of steps, hands, and hours required to craft this very refined couch.

    written by: Jaime Gillin
    photos by: Nicholas Calcott
    01.03.12

  4. The Pi Table
    How To

    The Pi Table

    Scrapile—Pull up a chair to one of Scrapile’s impossibly elegant dining tables and you’d never guess that the materials used to create it had once been destined for a landfill....

    written by: Mark Lamster
    photos by: Eirik Johnson
    01.25.09

  5. Steelwood Chair: Cuts, Curves, Cuts
    How To

    Steelwood Chair: Cuts, Curves, Cuts

    The tool that folds the curve of the back of the chair is the most dramatic, but it is no more essential than the others, which trim the edges, cut the holes, and add a final soft angle to the...

    01.01.09

  6. How To

    Building a Block

    With raw material in hand, they painstakingly assemble their scraps into a solid, ten-foot-long block that is eight inches square. To achieve the striated pattern of cascading bands that is...

    01.01.09

  7. 6 Steps: How to Make Charred Cedar Cladding
    How To

    6 Steps: How to Make Charred Cedar Cladding

    Master Japanese architect Terunobu Fujimori is an original thinker, and a pro at melding ancient traditions with modern design. So who better to offer a quick primer on how to char your own cedar...

    written by: Jaime Gillin
    photos by: Adam Friedberg
    05.28.13

  8. How To Remodel with Douglas Fir
    How To

    How To Remodel with Douglas Fir

    Warm up a new addition or highlight existing architecture with the right choice of wood—we recommend Douglas fir, an evergreen conifer native to the western coast of North America.

    written by: Kelsey Keith
    06.05.14

  9. Steelwood Chair
    How To

    Steelwood Chair

    Magis—The Steelwood chair from Magis is a product of experience—the suppliers who punch the sheet metal for the back, which adroitly supports four legs and a beech wood seat, are among...

    written by: Virginia Gardiner
    photos by: Erwan Bouroullec
    01.25.09

  10. Designing with Ipe: Hardwood at Home
    How To

    Designing with Ipe: Hardwood at Home

    Ipe, commonly known as Brazilian walnut, is a South American hardwood that is three times harder than cedar, has the same fire rating as concrete and steel, and is resistant to humidity and mildew....

    written by: Kelsey Keith
    10.16.13

  11. All-Clad: 7 Innovative Exteriors
    How To

    All-Clad: 7 Innovative Exteriors

    From wood to steel to glass to cement boards, we give you the inside track on the materials and techniques needed to make your facade sing.

    written by: Kelsey Keith
    10.24.13

Advertising